This bull float is made from lightweight magnesium, and is used to level and smooth the surface prior to finishing. Magnesium floats provide a smoother finish than wood floats

This panel lift is designed for assembly and operation by one person. Up to four 16' panels may be lifted to 11' with no extension. The DPL11 has a load capacity of 150 pounds

Electric Wallcovering Steamer for easy removal of wall coverings

Discs 17x2 Tungsten Carbide Abrasive Disc

10'6" aluminum siding brake

Multiquip concrete mixer towable, The ultimate in heavy mixers ideal for mixing large aggregrate

Compact, lightweight and engineered for maneuverability and reliability, the MK-CX-3 (Honda) can be used for wet or dry cutting. A corrosion resistant, cast-aluminum blade guard that mounts on either left- or right-hand side of saw enables cuts within 1" of wall or curb. Built-in water distribution system supplies water to both sides of blade. The CX-3 features a Poly V-belt for positive power transmission with a sturdy single piece steel motor mount weldment and a 1" diameter blade shaft with self aligning bearings to minimize vibration. The hinged blade guard provides easy access for blade changes and inspection and a folding handle bar for compact transport

2700 PSI @ 2.4 GPM Direct Drive Aluminum Frame Pressure Washer, 196cc Honda GX200 OHV With Low Oil Shut Down

1/2" Right Angle Drill, 0-335 RPM/0-750 RPM

Heat Gun 11.6A Varied Temp Kit

Tilt-Lok 7-1/4" Circular Saw with Case

JET Ratchet Type LOAD BINDER for 5/16-3/8" Chain -- Drop-forged, heat-treated alloy steel construction. Take up slack and secure chain around cargo in one operation. Easy-to-use with lever or ratchet type handle and 360° swivel hooks. Durable rust resistant powder coat finish. Complies with US DOT regulations. Do not exceed working load limit. Do not use for overhead lifting. Do not use if any components are damaged or worn. See True Value # 724684

JET 27" x 48" Forks, 5000-LB Capacity PALLET TRUCK -- High-quality welded steel construction with a durable powder coat finish 2-1/2" low profile design for smaller size pallet openings. Easy-to-use with single hand operation, fingertip controls and 180 degree turning radius. Extra wide poly-over-steel steer wheels provide a smooth, quiet ride with added traction and stability. Wheel bearings are double sealed and lifetime lubricated. When purchased through the True Value warehouse, this pallet truck is assembled. Otherwise, some assembly is required. See True Value # 724565

SLC24 Superlift

SLC18 Superlift

8" Gas 9HP Honda scarifier machine

PRO TUNGSERT- pack of 6

STRIP-SERT,

Dual Disc Gas Grinder with a 11 HP Honda engine

Heat Iron melts glue for carpet to adhere to

Knee Kicker is for stretching and flattening of carpet

Linoleum Roller is a tool used to flatten, smooth and apply weight when installing adhesive backed linoleum

Towable Boom Lift 3632T

Submersible Water Pump, Side Discharge, 2 inch ports, 150 gallons per minute